Get Your Pool Table Refelting Done By Someone Who Has Done It Before
by Leticia Jensen
Rips in the surface of your pool table can be very frustrating. There can be a small rip and it makes playing on it an interesting challenge. This means that, to not be accused of rigging the game in your favor, the felt should be repaired or replaced. A professional firm can do this <A href="http://www.americanbilliardsservice.com">pool table refelting</A> and they will make sure it is right.
A small rip can be repaired by you if you have a lot of patience. Careful measurements must be made and the felt will have to be cut exactly right. The proper amount of adhesive will need to used and the area will need to be prepared properly, first. This is a test of your attention to detail as the repair must not interfere with that next game.
Regardless of whether it is a rip or the table is just a bit worn or faded, a complete recovering may be appropriate. There are many such companies who specialize in this work in the Denver, CO area. They will help you discover all of the items that are needed and give you some valuable insights into such things as the proper side of the felt to use.
The professionals that do this have the experience to see it is done right. They will be able to help you see other possibilities for your table and help you with the decorative elements in the rest of the room. One of he first questions they will ask will have to do with the color you are interested in.
Most stock pool tables come in the basic, standard, green felt. This makes yours look like all others. You may want to stand out a little with other colors that are available. This is your time to decide about this as you can select reds, blues, purples, creams and several other colors. There are also pieces that have geometric designs and some with actual images on them. This will help brighten your room and that next party.
Watching the professionals go to work on your table will help you understand what they are doing and more about this game piece. The measurements will be exacting as will the dismantling of the rails. Removing the felt and old glue will make the way clear for the new piece. Old staples will also be removed so they do not interfere with a proper installation.
The exacting cuts on the felt will be accomplished, both lengthwise and for width. There will be a little left over for the staples to hang on to. There will then be applied a very thin coating of adhesive, but not too much. The felt is laid down and stretched, in all directions, to ensure a tight fit. This will then be stapled in the same location where the rails will be reattached.
The rails are taken apart, very carefully, and covered as well. They are reinstalled and weights are placed on the entire table to ensure a good fir and curing. This should stand, by itself, for about 24 hours as it cures properly. The company will make sure you are satisfied and stop by to deal with any issues. They might also ask you for a game to try it out.
If you are looking for information about the best <a href="http://www.americanbilliardsservice.com">pool table refelting</a>, pay a visit to the web pages here today. You can see details at http://www.americanbilliardsservice.com now.
---------------------------------------------------
You are receiving this because you signed up for it on 2013-07-23 from IP 197.206.251.134
To fine-tune your selection of which articles to receive, just login here:
http://www.uniquearticlewizard.com/bloggers/
using your username:
To unsubscribe please use the following link:
http://www.uniquearticlewizard.com/unsubscribe.php?mail=maxblogmax.madani@blogger.com&code=16554a6308a09067f2e4e4003fca1ea3
---------------------------------------------------
No comments:
Post a Comment