How To Make Handmade Orthotics

How To Make Handmade Orthotics

by Nelda Powers

Athletes or people who have a severe case of flat feet would usually wear some custom made insoles with an arch support in order to be able to make up for their flat arch. Now although usually these special types of insoles are made by professional manufacturers, they can actually be made at home. One can make handmade orthotics if his case is not very severe like if he just has a low arch.

So basically, in order to make one of these things, it is very important to have the necessary supplies. Basically, one would be needing a couple of existing insoles that would come from old shoes. One has to also make sure that the sizes of all the insoles are the same.

After getting a bunch of old insoles, then the next thing to do would be to get some super glue that is rather waterproof. Of course one will also be needing a pair of scissors that will be used to cut out these insoles. Once one has already gotten all of these materials, then he may now be able to make the homemade arch support.

So after getting the old insoles, one has to now do a bit of measurements. Always do make sure that all insoles have the same size so that it will be easier to place them on each other. So when one puts one insole on top of the other, he has to find the part that holds the arch of the foot.

After determining the part that would hold the arch, then he now has to cut that part with the sharp scissors. Now he has to make sure that the part that was cut out is really able to fit the insole that is whole otherwise one would have to cut it a little bit more. Once he has already done that, then the next part would be to now glue that small part to the whole insole.

After that, one may now leave the glue to dry before he tries to put it into his shoe and start walking. If he wants the glue to dry extremely fast, then he may use an electric fan to be able to help him. For fast drying purposes, one is recommended to use super fast drying glue that really sticks.

In the event that the arch support is still not high enough for the person making it, then he may actually put another insole if he would want. He just has to get the third insole and just do the entire process again. Once he has done that, then he just has to wait for the glue dry and then try it on again.

Now making <A href="http://www.customorthoticfootbeds.com">handmade orthotics</A> at home as quite easy as one will be able to see. However, do not try to do this if the flat feet case is quite severe. These handmade ones should only be used for those whose cases are not severe as the severe cases would already need the custom made ones with specific measurements.



<a href="http://www.customorthoticfootbeds.com">Read more about</a> Making A Pair Of Handmade Orthotics.

---------------------------------------------------
You are receiving this because you signed up for it on 2013-07-23 from IP 197.206.251.134
To fine-tune your selection of which articles to receive, just login here:

http://www.uniquearticlewizard.com/bloggers/

using your username:

To unsubscribe please use the following link:

http://www.uniquearticlewizard.com/unsubscribe.php?mail=maxblogmax.madani@blogger.com&code=16554a6308a09067f2e4e4003fca1ea3
---------------------------------------------------